Armory Craft Sig Sauer X-Five / X5 Internally Compensated Slide for P226 pistols
 
Coming Soon!
Please click on the BLUE "Notify When Available" button and you will receive an email nitification once the slides are ready to ship.
 
Got a standard P226 or Mk25 and that sexy X-Five is calling your name but the cost doesn’t make sense?
 
Now you can have that ‘X5 style’ look at a fraction of the cost and get all the advantages of a built-in compensator! Simply swap over your original P226 slide’s internal components and non-threaded barrel and you’re all set.
 
NO need for a new barrel.
This slide utilizes the stock (non-threaded) P226 barrel.
Internally compensated slide helps to reduce the felt recoil.
 
Stainless steel slide, available in these finishes:
- Black Nitride / QPQ 
- Stainless Steel
- Legion Gray
- Magpul FDE Cerakote
 
Compatible with SIG P226, P226 Legion, P226 Elite
Compatible with DASA and SAO versions of the above models
"Bare Slide Only" - sights & other internal parts NOT included.
All slide parts can be transfered from your existing slide)
Only for 9mm P226 pistols with non-threaded barrels. 
Not compatible with P226 LDC that uses the bull barrel
Not compatible with X-Short, X-Five, X-Sig German frames
Not compatible with any U.S X-Five Frames
 
Please do not forget to check our other performace parts shown here (Trigger, Hammer, Takedown lever, Exteneded magazine release button, MasterShop Style Slide Catch, Base Pads etc.) Please CLICK HERE for other Performance P226 Armory Craft parts.
 
Specifications for the optics cut-out:
Similar slide cut for optics as factory SIG P320 AXG model.
Rear screw holes are M4 for Romeo Pro and Leupold Delta Pro
Front scew holes are 6-40 for RMR/Trijicon and Holosun
Optic Cut allows mounting of red dot without removal of rear sight. Optic cut is compatible with:
Sig Romeo Pro
Leupold Delta Pro
Trijicon RMR
Trijicon SRO
Holosun (those models with RMR pattern: 407C, 507C, 508T)
SwampFox KINGSLAYER
Also compatible with other brands that share the same footprint as the above-listed optics.
 
You will NOT need any adapter plates for the above-listed optics and we do not recommend the usage of any aftermarket adapter plates, due to the variances between manufacturers.
 
IMPORTANT:
We provide only the two screws that attach the optic cover to the slide. Due to the various lengths of screws required from one red dot optic to another, we do NOT provide the various lengths of 6-40 or M4 screws. There is a good chance that you will already have the proper length that came with your optic, but it is also possible that you will have to source longer or shorter screws, depending on your optic.
 
MADE IN USA.
All slides are CNC machined out of a solid billet of stainless steel.
Hardened to SIG factory specifications
Manufacturing facility certified to ISO 9001/AS9100 & in accordance with the requirements of AS9104A.
Our manufacturing facility is also manufacturing products for Boeing, US Coast Guard, Lockheed, Honeywell and other major US companies.
 
IMPORTANT - Please read:
- Sorry, NO COUPONS can be used for this item
- No International Shipping
(If a coupon is used, the order will be cancelled and will have to be re-submitted. Thank you.)